DVSA Statistics
1990 Volvo 700 Series
MOT Pass Rate & Pre-MOT Checklist
Used 1990 Volvo 700 Seriess usually pass their MOT, but around 1 in 4 still fail, most often for fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn and exhaust system leaking or insecure. Based on 318 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 318 DVSA anonymised MOT tests · About this data
Pass Rate
75.8%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 318 recorded tests.
Pre-MOT Checklist for 1990 Volvo 700 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volvo 700 Series.
Frequently Asked Questions
Is a 1990 Volvo 700 Series likely to fail its MOT?
Based on DVSA statistics, the 1990 Volvo 700 Series has a 75.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1990 Volvo 700 Series?
The most common MOT failure reasons for a 1990 Volvo 700 Series are: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Volvo 700 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Volvo 700 Seriess fail their MOT?
Around 24% of 1990 Volvo 700 Seriess fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Volvo 700 Series MOT?
Before your 1990 Volvo 700 Series MOT, check these commonly-failed items: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Volvo 700 Series reliable for MOT?
With a 75.8% MOT pass rate, the 1990 Volvo 700 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.