DVSA Statistics
1990 Volvo 900 Series
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Volvo 900 Series (only 41 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 41 DVSA anonymised MOT tests · About this data
Pass Rate
78%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 41 recorded tests.
Pre-MOT Checklist for 1990 Volvo 900 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volvo 900 Series.
Frequently Asked Questions
Is a 1990 Volvo 900 Series likely to fail its MOT?
Based on DVSA statistics, the 1990 Volvo 900 Series has a 78% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1990 Volvo 900 Series?
The most common MOT failure reasons for a 1990 Volvo 900 Series are: a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Volvo 900 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Volvo 900 Seriess fail their MOT?
Around 22% of 1990 Volvo 900 Seriess fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Volvo 900 Series MOT?
Before your 1990 Volvo 900 Series MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Volvo 900 Series reliable for MOT?
With a 78% MOT pass rate, the 1990 Volvo 900 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.