DVSA Statistics
1995 Volvo 900 Series
MOT Pass Rate & Pre-MOT Checklist
Used 1995 Volvo 900 Seriess usually pass their MOT, but around 1 in 4 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn and exhaust system leaking or insecure. Based on 720 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 720 DVSA anonymised MOT tests · About this data
Pass Rate
76.1%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 720 recorded tests.
Pre-MOT Checklist for 1995 Volvo 900 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volvo 900 Series.
Frequently Asked Questions
Is a 1995 Volvo 900 Series likely to fail its MOT?
Based on DVSA statistics, the 1995 Volvo 900 Series has a 76.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1995 Volvo 900 Series?
The most common MOT failure reasons for a 1995 Volvo 900 Series are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1995 Volvo 900 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1995 Volvo 900 Seriess fail their MOT?
Around 24% of 1995 Volvo 900 Seriess fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1995 Volvo 900 Series MOT?
Before your 1995 Volvo 900 Series MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1995 Volvo 900 Series reliable for MOT?
With a 76.1% MOT pass rate, the 1995 Volvo 900 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.