DVSA Statistics
2010 Yamaha Mt03
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Yamaha Mt03 (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 2010 Yamaha Mt03
Based on common failure points for this model, check these items before your MOT:
- 1
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Yamaha Mt03.
Frequently Asked Questions
Is a 2010 Yamaha Mt03 likely to fail its MOT?
Based on DVSA statistics, the 2010 Yamaha Mt03 has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Yamaha Mt03?
The most common MOT failure reasons for a 2010 Yamaha Mt03 are: exhaust system leaking or insecure, exhaust noise levels in excess of those permitted, rear registration plate lamp does not illuminate simultaneously with the position lamps. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Yamaha Mt03 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: exhaust system leaking or insecure, exhaust noise levels in excess of those permitted, rear registration plate lamp does not illuminate simultaneously with the position lamps. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Yamaha Mt03s fail their MOT?
Around 17% of 2010 Yamaha Mt03s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are exhaust system leaking or insecure and exhaust noise levels in excess of those permitted. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Yamaha Mt03 MOT?
Before your 2010 Yamaha Mt03 MOT, check these commonly-failed items: exhaust system leaking or insecure, exhaust noise levels in excess of those permitted, rear registration plate lamp does not illuminate simultaneously with the position lamps. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Yamaha Mt03 reliable for MOT?
With a 83.3% MOT pass rate, the 2010 Yamaha Mt03 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.