Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Yamaha Wr250x
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Yamaha Wr250x (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

80%

Pass Rate

Based on 5 DVSA anonymised MOT tests · About this data

Pass Rate

80%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    Exhaust noise levels in excess of those permitted

    50%
  2. 2

    Projected beam image is obviously incorrect

    50%

Based on DVSA statistics from 5 recorded tests.

Pre-MOT Checklist for 2010 Yamaha Wr250x

Based on common failure points for this model, check these items before your MOT:

  • 1

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 2

    Check headlight beam pattern and alignment against a wall

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Yamaha Wr250x.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Yamaha Wr250x likely to fail its MOT?

Based on DVSA statistics, the 2010 Yamaha Wr250x has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Yamaha Wr250x?

The most common MOT failure reasons for a 2010 Yamaha Wr250x are: exhaust noise levels in excess of those permitted, projected beam image is obviously incorrect. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Yamaha Wr250x fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: exhaust noise levels in excess of those permitted, projected beam image is obviously incorrect. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Yamaha Wr250xs fail their MOT?

Around 20% of 2010 Yamaha Wr250xs fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are exhaust noise levels in excess of those permitted and projected beam image is obviously incorrect. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Yamaha Wr250x MOT?

Before your 2010 Yamaha Wr250x MOT, check these commonly-failed items: exhaust noise levels in excess of those permitted, projected beam image is obviously incorrect. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Yamaha Wr250x reliable for MOT?

With a 80% MOT pass rate, the 2010 Yamaha Wr250x performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.