DVSA Statistics
2008 Yamaha Xc125e Vity
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Yamaha Xc125e Vity (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2008 Yamaha Xc125e Vity
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check headlight beam pattern and alignment against a wall
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Yamaha Xc125e Vity.
Frequently Asked Questions
Is a 2008 Yamaha Xc125e Vity likely to fail its MOT?
Based on DVSA statistics, the 2008 Yamaha Xc125e Vity has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2008 Yamaha Xc125e Vity?
The most common MOT failure reasons for a 2008 Yamaha Xc125e Vity are: significant brake effort recorded with no brake applied indicating a binding brake, projected beam image is obviously incorrect, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Yamaha Xc125e Vity fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: significant brake effort recorded with no brake applied indicating a binding brake, projected beam image is obviously incorrect, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Yamaha Xc125e Vitys fail their MOT?
Around 50% of 2008 Yamaha Xc125e Vitys fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are significant brake effort recorded with no brake applied indicating a binding brake and projected beam image is obviously incorrect. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Yamaha Xc125e Vity MOT?
Before your 2008 Yamaha Xc125e Vity MOT, check these commonly-failed items: significant brake effort recorded with no brake applied indicating a binding brake, projected beam image is obviously incorrect, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Yamaha Xc125e Vity reliable for MOT?
With a 50% MOT pass rate, the 2008 Yamaha Xc125e Vity performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.