DVSA Statistics
1988 Austin Mini 1000 City E
MOT Pass Rate & Pre-MOT Checklist
Used 1988 Austin Mini 1000 City Es usually pass their MOT, but around 1 in 4 still fail, most often for emissions levels exceed default limits, a suspension pin, bush or joint excessively worn and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Based on 188 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 188 DVSA anonymised MOT tests · About this data
Pass Rate
73.4%
About average
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 188 recorded tests.
Pre-MOT Checklist for 1988 Austin Mini 1000 City E
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Austin Mini 1000 City E.
Frequently Asked Questions
Is a 1988 Austin Mini 1000 City E likely to fail its MOT?
Based on DVSA statistics, the 1988 Austin Mini 1000 City E has a 73.4% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1988 Austin Mini 1000 City E?
The most common MOT failure reasons for a 1988 Austin Mini 1000 City E are: emissions levels exceed default limits, a suspension pin, bush or joint excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 Austin Mini 1000 City E fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: emissions levels exceed default limits, a suspension pin, bush or joint excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 Austin Mini 1000 City Es fail their MOT?
Around 27% of 1988 Austin Mini 1000 City Es fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are emissions levels exceed default limits and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 Austin Mini 1000 City E MOT?
Before your 1988 Austin Mini 1000 City E MOT, check these commonly-failed items: emissions levels exceed default limits, a suspension pin, bush or joint excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 Austin Mini 1000 City E reliable for MOT?
With a 73.4% MOT pass rate, the 1988 Austin Mini 1000 City E performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.