DVSA Statistics
2008 BMW 1
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 BMW 1 (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
76.5%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 2008 BMW 1
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 1.
Frequently Asked Questions
Is a 2008 BMW 1 likely to fail its MOT?
Based on DVSA statistics, the 2008 BMW 1 has a 76.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2008 BMW 1?
The most common MOT failure reasons for a 2008 BMW 1 are: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, a shock absorber damaged to the extent that it does not function or showing signs of severe leakage, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 BMW 1 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, a shock absorber damaged to the extent that it does not function or showing signs of severe leakage, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 BMW 1s fail their MOT?
Around 24% of 2008 BMW 1s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched and a shock absorber damaged to the extent that it does not function or showing signs of severe leakage. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 BMW 1 MOT?
Before your 2008 BMW 1 MOT, check these commonly-failed items: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, a shock absorber damaged to the extent that it does not function or showing signs of severe leakage, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 BMW 1 reliable for MOT?
With a 76.5% MOT pass rate, the 2008 BMW 1 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.