Skip to content
MOTCHECK
Beta

DVSA Statistics

2009 BMW 1
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2009 BMW 1 (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

80%

Pass Rate

Based on 10 DVSA anonymised MOT tests · About this data

Pass Rate

80%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:A flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched

    25%
  2. 2

    Significant brake effort recorded with no brake applied indicating a binding brake

    12.5%
  3. 3

    Excessive fluctuation in brake effort through each wheel revolution.

    12.5%
  4. 4

    A suspension pin, bush or joint excessively worn

    12.5%
  5. 5

    Brake disc or drum significantly and obviously worn

    12.5%

Based on DVSA statistics from 10 recorded tests.

Pre-MOT Checklist for 2009 BMW 1

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 10 MOT tests from the 2023 DVSA dataset. Your 2009 BMW 1 was 14 years old when this data was collected and is now 17 years old.

Sample Size

Limited data - 10 tests (use as rough guide only)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact BMW 1.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2009 BMW 1 likely to fail its MOT?

Based on DVSA statistics, the 2009 BMW 1 has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2009 BMW 1?

The most common MOT failure reasons for a 2009 BMW 1 are: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, significant brake effort recorded with no brake applied indicating a binding brake, excessive fluctuation in brake effort through each wheel revolution.. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2009 BMW 1 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, significant brake effort recorded with no brake applied indicating a binding brake, excessive fluctuation in brake effort through each wheel revolution.. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2009 BMW 1s fail their MOT?

Around 20% of 2009 BMW 1s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched and significant brake effort recorded with no brake applied indicating a binding brake. Pre-checking these items can significantly improve your chances.

What should I check before my 2009 BMW 1 MOT?

Before your 2009 BMW 1 MOT, check these commonly-failed items: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, significant brake effort recorded with no brake applied indicating a binding brake, excessive fluctuation in brake effort through each wheel revolution.. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2009 BMW 1 reliable for MOT?

With a 80% MOT pass rate, the 2009 BMW 1 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.