DVSA Statistics
2003 Ford Explorer
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2003 Ford Explorer (only 31 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 31 DVSA anonymised MOT tests · About this data
Pass Rate
87.1%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 31 recorded tests.
Pre-MOT Checklist for 2003 Ford Explorer
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Explorer.
Frequently Asked Questions
Is a 2003 Ford Explorer likely to fail its MOT?
Based on DVSA statistics, the 2003 Ford Explorer has a 87.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2003 Ford Explorer?
The most common MOT failure reasons for a 2003 Ford Explorer are: body, cab or chassis excessively corroded at a mounting point, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a brake hose ferrule excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2003 Ford Explorer fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: body, cab or chassis excessively corroded at a mounting point, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a brake hose ferrule excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2003 Ford Explorers fail their MOT?
Around 13% of 2003 Ford Explorers fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are body, cab or chassis excessively corroded at a mounting point and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2003 Ford Explorer MOT?
Before your 2003 Ford Explorer MOT, check these commonly-failed items: body, cab or chassis excessively corroded at a mounting point, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a brake hose ferrule excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2003 Ford Explorer reliable for MOT?
With a 87.1% MOT pass rate, the 2003 Ford Explorer performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.