DVSA Statistics
2010 Ford Freda
MOT Pass Rate & Pre-MOT Checklist
Used 2010 Ford Fredas usually pass their MOT, but around 1 in 4 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn and the aim of a headlamp is not within limits laid down in the requirements. Based on 65 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 65 DVSA anonymised MOT tests · About this data
Pass Rate
73.8%
About average
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 65 recorded tests.
Pre-MOT Checklist for 2010 Ford Freda
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Freda.
Frequently Asked Questions
Is a 2010 Ford Freda likely to fail its MOT?
Based on DVSA statistics, the 2010 Ford Freda has a 73.8% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2010 Ford Freda?
The most common MOT failure reasons for a 2010 Ford Freda are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Ford Freda fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Ford Fredas fail their MOT?
Around 26% of 2010 Ford Fredas fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Ford Freda MOT?
Before your 2010 Ford Freda MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Ford Freda reliable for MOT?
With a 73.8% MOT pass rate, the 2010 Ford Freda performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.