DVSA Statistics
2011 Ford Freda
MOT Pass Rate & Pre-MOT Checklist
Used 2011 Ford Fredas usually pass their MOT, but around 1 in 3 still fail, most often for a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a tyre seriously damaged. Based on 71 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 71 DVSA anonymised MOT tests · About this data
Pass Rate
69%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 71 recorded tests.
Pre-MOT Checklist for 2011 Ford Freda
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
How Does This Compare to Other Years?
Previous Year
2010 Ford Freda
Based on 65 UK MOT tests
Next Year
2012 Ford Freda
Based on 28 UK MOT tests
The 2011 model has a lower pass rate than 2010, but performs better than 2012.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 71 MOT tests from the 2023 DVSA dataset. Your 2011 Ford Freda was 12 years old when this data was collected and is now 15 years old.
Sample Size
Moderate confidence - 71 tests (interpret with caution)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Freda.
Frequently Asked Questions
Is a 2011 Ford Freda likely to fail its MOT?
Based on DVSA statistics, the 2011 Ford Freda has a 69% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2011 Ford Freda?
The most common MOT failure reasons for a 2011 Ford Freda are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 Ford Freda fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 Ford Fredas fail their MOT?
Around 31% of 2011 Ford Fredas fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 Ford Freda MOT?
Before your 2011 Ford Freda MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 Ford Freda reliable for MOT?
With a 69% MOT pass rate, the 2011 Ford Freda performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.