DVSA Statistics
1973 Jensen Interceptor Iii Auto
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1973 Jensen Interceptor Iii Auto (only 18 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 18 DVSA anonymised MOT tests · About this data
Pass Rate
88.9%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 18 recorded tests.
Pre-MOT Checklist for 1973 Jensen Interceptor Iii Auto
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jensen Interceptor Iii Auto.
Frequently Asked Questions
Is a 1973 Jensen Interceptor Iii Auto likely to fail its MOT?
Based on DVSA statistics, the 1973 Jensen Interceptor Iii Auto has a 88.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1973 Jensen Interceptor Iii Auto?
The most common MOT failure reasons for a 1973 Jensen Interceptor Iii Auto are: a wheel bearing with excessive play, parking brake inoperative on one side, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1973 Jensen Interceptor Iii Auto fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a wheel bearing with excessive play, parking brake inoperative on one side, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1973 Jensen Interceptor Iii Autos fail their MOT?
Around 11% of 1973 Jensen Interceptor Iii Autos fail their MOT test, meaning roughly 1 in 9 don't pass first time. The most common reasons are a wheel bearing with excessive play and parking brake inoperative on one side. Pre-checking these items can significantly improve your chances.
What should I check before my 1973 Jensen Interceptor Iii Auto MOT?
Before your 1973 Jensen Interceptor Iii Auto MOT, check these commonly-failed items: a wheel bearing with excessive play, parking brake inoperative on one side, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1973 Jensen Interceptor Iii Auto reliable for MOT?
With a 88.9% MOT pass rate, the 1973 Jensen Interceptor Iii Auto performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.