Skip to content
MOTCHECK
Beta

DVSA Statistics

1990 Kawasaki En500
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1990 Kawasaki En500 (only 24 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

87.5%

Pass Rate

Based on 24 DVSA anonymised MOT tests · About this data

Pass Rate

87.5%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:A tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber

    28.6%
  2. 2

    The aim of a headlamp is not within limits laid down in the requirements

    14.3%
  3. 3

    A brake on any wheel grabbing severely

    14.3%
  4. 4

    Reflector missing or reflecting white to the rear

    14.3%
  5. 5

    A headlamp missing, inoperative or more than ½ not functioning in the case of LED

    14.3%

Based on DVSA statistics from 24 recorded tests.

Pre-MOT Checklist for 1990 Kawasaki En500

Based on common failure points for this model, check these items before your MOT:

  • 1

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

  • 2

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

  • 3

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

How Does This Compare to Other Years?

See how this 1990 model compares to the next model year.

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 24 MOT tests from the 2023 DVSA dataset. Your 1990 Kawasaki En500 was 33 years old when this data was collected and is now 36 years old.

Sample Size

Limited data - 24 tests (use as rough guide only)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Kawasaki En500.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1990 Kawasaki En500 likely to fail its MOT?

Based on DVSA statistics, the 1990 Kawasaki En500 has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1990 Kawasaki En500?

The most common MOT failure reasons for a 1990 Kawasaki En500 are: a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber, the aim of a headlamp is not within limits laid down in the requirements, a brake on any wheel grabbing severely. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1990 Kawasaki En500 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber, the aim of a headlamp is not within limits laid down in the requirements, a brake on any wheel grabbing severely. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1990 Kawasaki En500s fail their MOT?

Around 13% of 1990 Kawasaki En500s fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 1990 Kawasaki En500 MOT?

Before your 1990 Kawasaki En500 MOT, check these commonly-failed items: a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber, the aim of a headlamp is not within limits laid down in the requirements, a brake on any wheel grabbing severely. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1990 Kawasaki En500 reliable for MOT?

With a 87.5% MOT pass rate, the 1990 Kawasaki En500 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.