DVSA Statistics
2012 Peugeot 2008
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Peugeot 2008 (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
72.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 2012 Peugeot 2008
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Peugeot 2008.
Frequently Asked Questions
Is a 2012 Peugeot 2008 likely to fail its MOT?
Based on DVSA statistics, the 2012 Peugeot 2008 has a 72.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2012 Peugeot 2008?
The most common MOT failure reasons for a 2012 Peugeot 2008 are: a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm, a tyre seriously damaged. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Peugeot 2008 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm, a tyre seriously damaged. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Peugeot 2008s fail their MOT?
Around 27% of 2012 Peugeot 2008s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a brake lining or pad worn below 1.5mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Peugeot 2008 MOT?
Before your 2012 Peugeot 2008 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm, a tyre seriously damaged. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Peugeot 2008 reliable for MOT?
With a 72.7% MOT pass rate, the 2012 Peugeot 2008 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.