Skip to content
MOTCHECK
Beta

DVSA Statistics

1990 Porsche 944
MOT Pass Rate & Pre-MOT Checklist

Used 1990 Porsche 944s usually pass their MOT, but around 1 in 6 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded and an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Based on 345 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

84.6%

Pass Rate

Based on 345 DVSA anonymised MOT tests · About this data

Pass Rate

84.6%

Higher than average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake pipe damaged or excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    6.7%
  2. 2

    Brake pipe damaged or excessively corroded

    5.3%
  3. 3

    An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning

    4.6%
  4. 4

    The aim of a headlamp is not within limits laid down in the requirements

    3.9%
  5. 5

    A suspension pin, bush or joint excessively worn

    3.9%

Based on DVSA statistics from 345 recorded tests.

Pre-MOT Checklist for 1990 Porsche 944

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 3

    Test front and rear fog lights work - check warning light on dashboard

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Porsche 944.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1990 Porsche 944 likely to fail its MOT?

Based on DVSA statistics, the 1990 Porsche 944 has a 84.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1990 Porsche 944?

The most common MOT failure reasons for a 1990 Porsche 944 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1990 Porsche 944 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1990 Porsche 944s fail their MOT?

Around 15% of 1990 Porsche 944s fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and brake pipe damaged or excessively corroded. Pre-checking these items can significantly improve your chances.

What should I check before my 1990 Porsche 944 MOT?

Before your 1990 Porsche 944 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1990 Porsche 944 reliable for MOT?

With a 84.6% MOT pass rate, the 1990 Porsche 944 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.