DVSA Statistics
2010 Qingqi Qm
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Qingqi Qm (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 2010 Qingqi Qm
Based on common failure points for this model, check these items before your MOT:
- 1
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 2
Check headlight beam pattern and alignment against a wall
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Qingqi Qm.
Frequently Asked Questions
Is a 2010 Qingqi Qm likely to fail its MOT?
Based on DVSA statistics, the 2010 Qingqi Qm has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Qingqi Qm?
The most common MOT failure reasons for a 2010 Qingqi Qm are: a shock absorber not functioning or leaking severely, a shock absorber bush excessively worn, forks or fork yoke fractured, insecure, excessively deformed or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Qingqi Qm fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, a shock absorber bush excessively worn, forks or fork yoke fractured, insecure, excessively deformed or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Qingqi Qms fail their MOT?
Around 50% of 2010 Qingqi Qms fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and a shock absorber bush excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Qingqi Qm MOT?
Before your 2010 Qingqi Qm MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, a shock absorber bush excessively worn, forks or fork yoke fractured, insecure, excessively deformed or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Qingqi Qm reliable for MOT?
With a 50% MOT pass rate, the 2010 Qingqi Qm performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.