DVSA Statistics
2011 Qingqi Qm
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2011 Qingqi Qm (only 13 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 13 DVSA anonymised MOT tests · About this data
Pass Rate
69.2%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 13 recorded tests.
Pre-MOT Checklist for 2011 Qingqi Qm
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Qingqi Qm.
Frequently Asked Questions
Is a 2011 Qingqi Qm likely to fail its MOT?
Based on DVSA statistics, the 2011 Qingqi Qm has a 69.2% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2011 Qingqi Qm?
The most common MOT failure reasons for a 2011 Qingqi Qm are: a spoke missing, cracked, excessively loose, bent or corroded, a suspension pin, bush or joint excessively worn, a headlamp missing, inoperative or more than â½ not functioning in the case of led. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 Qingqi Qm fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spoke missing, cracked, excessively loose, bent or corroded, a suspension pin, bush or joint excessively worn, a headlamp missing, inoperative or more than â½ not functioning in the case of led. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 Qingqi Qms fail their MOT?
Around 31% of 2011 Qingqi Qms fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a spoke missing, cracked, excessively loose, bent or corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 Qingqi Qm MOT?
Before your 2011 Qingqi Qm MOT, check these commonly-failed items: a spoke missing, cracked, excessively loose, bent or corroded, a suspension pin, bush or joint excessively worn, a headlamp missing, inoperative or more than â½ not functioning in the case of led. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 Qingqi Qm reliable for MOT?
With a 69.2% MOT pass rate, the 2011 Qingqi Qm performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.