DVSA Statistics
1997 Rover 100
MOT Pass Rate & Pre-MOT Checklist
Used 1997 Rover 100s usually pass their MOT, but around 1 in 4 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded and service brake efficiency below minimum requirement. Based on 115 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 115 DVSA anonymised MOT tests · About this data
Pass Rate
75.7%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 115 recorded tests.
Pre-MOT Checklist for 1997 Rover 100
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 100.
Frequently Asked Questions
Is a 1997 Rover 100 likely to fail its MOT?
Based on DVSA statistics, the 1997 Rover 100 has a 75.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1997 Rover 100?
The most common MOT failure reasons for a 1997 Rover 100 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Rover 100 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Rover 100s fail their MOT?
Around 24% of 1997 Rover 100s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and brake pipe damaged or excessively corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Rover 100 MOT?
Before your 1997 Rover 100 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Rover 100 reliable for MOT?
With a 75.7% MOT pass rate, the 1997 Rover 100 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.